Posts Tagged ‘DIY’

Getting The Most Out Of Your Flooring Ideas

Monday, January 2nd, 2012

Ideas for your your floor covering project can be difficult to find. This is mostly true for those who are not accustomed to makine these types of decisions about their home’s decor. The initial project idea may seem exciting at first. The number of choices available to you may seem overwhelming especially if you are unaware of what choices are available in the first place. We will discuss these options in this article. Check out these informational resources – water damage Tampa and Tampa water damage restoration.

Did you know that you can have rubber floors? While it sounds like an accident waiting to happen, it is available. This is the most common flooring used in schools because it is easy to keep up, easy to clean and can withstand a lot of harsh treatment without needing to be replaced. We would recommend using rubbing flooring in your rec room, your kids’ rooms, and your basement. If you have a room that sees a lot of abuse or hard use, rubber flooring is a good idea. With very little maintenance, this flooring can withstand quite a bit.

We consider the above thoughts and suggestions must be taken into account in any conversation on flooring. Of course we strongly recommend you discover more about them. It is difficult to ascertain all the different means by which they can serve you. Do take the time and make the attempt to discover the big picture of this. So we will give you a few more important points to think about.

Another great flooring idea is cork. If you’re looking for something more environmentally friendly, cork is a good option. The flooring is only made from the hard pressed bark of the trees so no trees need to be harvested for this flooring. Another selling point of cork flooring is it will help regulate your home’s temperature. If you stand all day at your job, this type of flooring will be beneficial because it has more give to it. Cork also works well as a decorative flooring. The fact that cork is absorbent allows it to take stains and dyes well.

Another awesome look is Marble Flooring if you can afford them. If you aren’t financially able to absorb the expense there are less expensive options. You can buy the tiles in foot square pieces and installing them is quite easy. If you have your heart set on marble tiles but find yourself on a limited budget you might want to consider installing them yourself. Lots of people who choose marble will only install it in one or two places in the house. Many will install it in the entryway of their home. Some will choose to install on the staircase too.

It can be challenging to think of new flooring options. Figuring out the look and feel you are after takes some research. You will also need to consider your lifestyle and your ambitions for your home when choosing new flooring. If one of your goals is to make your home more environmentally friendly, that will limit your flooring options. If you’re working within a tight budget, your choices will be limited. Make sure to know what you can afford at the beginning of your remodeling project.

The author is a search marketing expert – who writes on various real estate topics similar to – Orlando Homes and investment property.

Six Useful Pieces Of Advice For Saving Money

Tuesday, December 20th, 2011

When times are difficult, like they have become lately, it is time to cut costs. This is not a popular move, but to be honest, it need not be such a problem as you might envisage. The biggest single cost for most households is the energy bill and in especially the electric bill. If you do not use electricity to cook or heat your house, then the next greatest contributor to your bill is probably lighting.

Anyway, here are six tips for reducing your household expenditure.

1] Plan your menu before you go shopping. If you are able to, plan your meals for the entire week so that you can use bits and pieces from one day’s meals in the next day’s. It is also easier and cheaper to buy in bulk, which will also save you travelling costs. Use coupons were you can. It is an obvious idea, but one that a lot of people overlook as they read their magazines.

2] Replace all your traditional, incandescent light bulbs with compact fluorescent bulbs (CFL). These bulbs use a low quantity of energy, but still put out a high amount of light. It is a good idea to check for the ‘Energy Star’ rating before you buy in order to make certain that you are getting a high quality product.

3] Instead of using all the lighting in a room, try to illuminate only what you have to. If you are working at your desk, switch off all the other lighting except a desk top lamp and possibly a standard floor lamp. It is astounding how far light travels in a dak room. The light from two lamps such as these will be plenty to see your way around too.

4] Buy stocks of light bulbs by the dozen. They will last a long time, but the CFL bulbs will not deteriorate, so as the price increases with inflation, you will have a stock at the old price. If you can, buy them online, because an online retailer has fewer overheads, which can convert into savings of as much as 70%. Online auctions are also a great idea, you may be able to pick up bankrupt stock.

5] Cook your own meals and make your own food for work. Take homemade sandwiches or salads. A flask of tea or coffee will provide up to $25 of Starbucks’ alternative coffee drinks

6] Put as many of your lights and appliances on timers or photosensitive switches. If you use passive infra red sensors to activate lights to deter intruders in your garden, you could be burning more electricity than you have to during the day. If you buy flood lights with photosensitive switches, then they will deactivate the lights during daylight when they are pretty ineffective anyway.

If you have a pond and pond lights, you can also use similar devices to turn your pond lights and pond fountain off during the night..

None of these measures should have a negative effect on your lifestyle, although they will save you money.

Owen Jones, the writer of this article writes on several subjects, but is at present involved with researching wrought iron floor lamps. If you would like to know more or check out great offers, please go to our website at Wrought Iron Light

Exterior Shutters For Security And Lighting Purposes

Wednesday, December 7th, 2011

When you want to add style to your house, one way of doing so and adding security at the same time, is by having window shutters fixed to the outside of your house. Exterior window shutters add a traditional, Mediterranean look to a building. These days, most houses have glass windows, but before that, people used shutters to adjust the light levels, stop insects and the cold from entering and for protection.

Exterior window shutters are available in many different shapes and made from various materials, although the most common ones are wooden and oblong. The quality of the materials used will determine how long your shutters will last, because, as with all exterior goods, they will be exposed to all types of extreme weather conditions.

Plastic, vinyl, metal and wooden shutters are available at many home improvement centres. Although they look good, shutters also have practical uses. They can prevent glaring noon sunlight from over heating your home as well as offering protection.

Cedar wood is a good choice, as are most other hard woods. Hardwoods are more resistant to rain and sunlight and, so long as they are painted, varnished or oiled regularly – at least once a year – then your shutters will give you ten or more years of good service.

Most varieties of hardwood are very resistant to attack from insects too. This is because a lot of them contain oils that are repugnant or even poisonous to insects. However, if you are uncertain about the quality of the timber that your shutters are crafted from, you can paint them.

Painting, staining or oiling is far easier if you carry it out before you hang the shutters. If you want to use oil to protect your new wooden shutters, first stain them to the colour that you want them to be with a stain without varnish. When you have accomplished the desired shade and it has dried, pour oil linseed oil onto a cloth and rub it into the wood in circular motions. The more coats you give it the better, but it may not accept more that two or three coats.

If you want to varnish your shutters, either stain them to the colour you require as above and then seal them with clear yacht varnish or use a stained yacht varnish without the stain. Whichever way you go, thin the first coat of varnish down until it is almost watery. Paint it on and leave to dry. Rub it down with medium coarse sandpaper and then coat it again with neat varnish. Wait for it to dry and sand it down again, but with fine sandpaper. Add at least one more coat, but it is a matter of the more the better.

If you want to paint them, apply a primer or some thinned down undercoat. Wait for it to dry and sand it lightly with fine sandpaper. Next, put on a coat of undercoat that is appropriate for the finishing colour. For example, grey is good for black, brown and even green or red. Sand it down when it is dry with fine paper. Finally, gloss your shutters with the final colour.

In conclusion, hang the shutters on appropriate hinges using brass screws. Next time, you paint or varnish your shutters paint over the screw heads, although brass never looks out of place anyway.

Owen Jones, the writer of this piece writes on several subjects, but is at present concerned with researching wrought iron floor lamps. If you would like to know more or check out great offers, please go to our website at Wrought Iron Light

How Lighting Can Create Ambiance And Save You Money

Saturday, November 26th, 2011

There is no doubt that lighting has the greatest influence on atmosphere and. Soft lighting in a bedroom or at an intimate dinner results in a romantic ambiance; bright, purposeful lighting in the office or kitchen shows that you mean business; dimmed lighting in the living room creates a relaxing atmosphere in which to watch a film or read a book.

Understated, back lighting behind flowers or a waterfall leads to a magical atmosphere, whereas severe floodlights turned on by a motion sensor would freeze most intruders in their tracks.

Getting the lighting wrong can have a gravely adverse effect on any room or occasion. Imagine a romantic dinner for two by candlelight and then imagine it by a naked 100 watt bulb hanging from the ceiling or a fluorescent tube.

It is said that the average household can save at least twenty-five percent on its electricity bills by using lighting more effectively and therefore more efficiently. More notably, you could save more than sixty percent, if you switch from the normal incandescent light bulbs to high-output compact fluorescent lights. Sixty percent is a massive saving for you, your country and your planet.

Here are some of the ways that you can achieve savings on the energy you currently expend on lighting.

Make the addition of dimmers wherever you use lighting. You can put a touch lamp dimmer into the wiring of any lamp, so that when you touch it, it changes from low, to medium, to high, to off. You will be surprised how often you will lower the light once you are able to, particularly in the case of desk or table lamps and standard floor lamps.

In a similar vein is the touch switch that you can utilize to control lighting that traditionally hangs from the ceiling. You will be able to dim the lights in any room and on the patio or deck too.

Photosensitive devices turn whatever they control off or on when the sun comes up. This is handy if you have motion-activated anti-intruder lighting. There is absolutely no need for it in the daytime, but you do not want to have to remember to switch it off in the mornings and reactivate it every night either.

Another use could be to turn the fishpond fountain off when it gets dark. All of these photosensitive switches can have over-ride switches too. These photosensitive devices will virtually half the cost of running the systems to which they are attached.

It is very easy to make fairly substantial savings if you put your mind to it. Just rearranging your furniture to take maximum advantage of natural light can help a lot too. Sitting near a window or in the garden to read the newspaper is far better than having to switch the kitchen light on to read it in there.

In the evening it is better to switch off all the main lights in the living room if you are watching television or reading a book and place one standard floor lamp just to one side behind you. It is plenty to read by or to save your eyes from the strain of watching TV in the dark.

Owen Jones, the author of this article writes on several subjects, but is at present concerned with researching wrought iron floor lamps. If you would like to know more or check out great offers, please go to our website at Wrought Iron Light

The Mighty Skill Saw

Tuesday, November 22nd, 2011

Another name for the skill saw is the circular saw. This saw is very helpful for the homeowner, the DIYer, and the carpenter/woodworker.

It is a very well-liked and handy saw among many people for completing a wide range of jobs.

The saw itself may be mounted on a table or hand held. The choice is up to the person. Another alternative is that the saws can be purchased to be run on either electric or battery power. If the battery operated saw is being used, it is very important that the correct battery is used.

The skill saw has a metal-toothed blade or disc. There are lots of different blades manufactured to fit most needs. The blades are able to cut wood, metal, plaster board, and masonry or stonework. The saw is able to create sharp rep cuts, cross cuts, and narrow slots.

Each saw is equipped with a blade guard. This guard should be used at all times. The blades used should always be sharp and of the right size. A skill saw can be very hazardous if it is not used properly.

There are numerous different models of skill saws on the market. The amount of torque that each motor provides makes the difference in the models. The two variations that are used the most are the worm drive and the side winder.

On the worm drive the motor will is situated behind the blade. The blade is located on the opposite side to that of the side winder motor. This permits the user to see the line they have marked without having to look over the saw, thereby allowing for better accuracy. If the blade is on the left side, it is easier to cut small strips off an edge.

Whilst cutting in a downward direction, the weight of the worm drive helps propel it, making cutting a lot easier. Whilst cutting overhead, the two handles on a worm drive make the job easier.

The worm drive is very sturdy and powerful and so is used by many carpenters and woodworkers.

The side winder is a good saw for the DIYer or someone that needs it sometimes. The side winder is far easier to handle than the worm disk as it is a lot lighter.

On the side winder the drive motor is positioned on either side of the blade. The drive shaft for the blade is powered by a motor. The cutting RPM of a side winder is faster than a worm drive as the blade is in line with the drive gear. This increased speed can be as much as 2000 rpm.

You ought to read and follow the safety instructions that come with the saw. It is recommended that goggles be worn when using a skill saw.

There are many makes of skill saw on the market; they may be found at hardware shops, and companies such as Sears, Walmart, and Home Depot. The prices of these saws vary, so you need to shop around and find the skill saw that fits your requirements.

Owen Jones, the author of this article writes on several subjects, but is currently involved with Black and Decker Tools. If you would like to know more or check out some great offers, please go to our website at Woodworking Power Tools

Landscaping your garden to include a range of attractive features

Wednesday, November 16th, 2011

Landscaping is the key to getting a lovely garden. It is possible to do the landscaping in your garden on your own. You just need to have a keen eye for possibilities. You can then make some designs about how best to split up different features in your garden full for effect.

A lot of people like to devote a portion of their garden to lawn space. Lawns are lovely because they are rich and green and they provide a nice soft surface to walk on. They are obviously very important in family gardens because they give children space to play.

A garden is not really a garden unless it has some plants and flowers in it. You can use potted plants or you can plant directly into designated borders. Flower beds are really lovely because they encourage wildlife and they make your garden feel more like a little bit of nature right outside the back door.

It is fairly common for homeowners to introduce ponds, rockeries and water features at home as well. These features add a new dimension that often lifts the aesthetic in the garden. For all that, you can’t actually get out and enjoy your garden fully unless you have a nice area devoted to sociability. Sociable spaces in the garden open the whole area up for your own enjoyment.

The best way to create a sociable area in the garden is simply to set out a space that you can cover with nice paving stones. If you prefer, you can introduce block paving or paving flags. It is practical to have a paved area stretching from the back door, but you can explore more possibilities like creating another paved area away from the house giving a different perspective on the garden.

Garden paths are a good way of finishing things off. You can create a garden path with paving slabs that direct people through all the features you have included in your landscaping project. This ensures people sample all the attractive features.

You can use Paving Flags to spruce up the outward appearance and curb appeal of your home. For ideas about styles and designs, visit the www.pavingsuperstore.co.uk online soon.

How To Use Dairy Products Correctly: Part Three – Eggs

Tuesday, July 5th, 2011

Basic Preparation Of Foods: Dairy Produce.

EGGS: Part 1

Eggs can be fresh or dried, dried eggs being only chickens’ eggs without the shell and water. Dried egg should be stored in a cool, dry place – it may not be stored in the refrigerator! Store eggs for several days – even a week – in a cool place not close to strong-smelling foods. An egg stand is an ideal gadget for this. If the eggs are dirty, wipe them clean with a damp cloth- washing will only remove the natural oils which help to preserve the eggs.

Pickled Eggs: eggs laid in the Spring keep longer than those laid in other seasons. Eggs that can not be cleaned-up, must be refused. Waterglass or the proprietary preparations should be used. if an egg floats to the surface, use it immediately. Try to maintain the ambient temperature between 2 and 8 degrees C and they should keep for 6 to 9 months.

Preparing Eggs for Cooking: break each egg into a cup on its own, before adding it to the other ingredients to ensure that it is still fresh. If you wish to separate the white from the yolk, tip the contents of the egg back and forth between the two egg shell halves and the albumen (white) will separate from the yolk. Beat the eggs with a whisk or a fork in an appropriate bowl. Egg whites should be whipped with a knife on a plate – a tiny amount of of salt will help.

Raw eggs used to be prescribed for invalids as they are easily digestible, however, this not to be recommended these days due to the ubiquity of salmonella. One method, presented here for the curious was to strain a beaten egg into a mug and slowly add a cup of hot milk (or tea, coffee or lemon water; add sugar to taste. Sherry was often added too.

Cooking Eggs: eggs must be cooked slowly because the albumen solidifies at a temperature lower than that of boiling water and becomes ‘tough’ at higher temperatures. By the same token, if raw egg is used to thicken a sauce and the liquid is subsequently allowed to boil, the sauce will ‘curdle’, i.e. the egg will solidify into small specks, spoiling its texture.

Coddling: produces easily digested egg-whites, making it an ideal meal for invalids and children. Lower the eggs into 3″of boiling water; replace the lid and remove from heat. Let it stand for: 7 mins for medium-, 5 mins for soft- and 20 mins for hard-boiled eggs .

Boiling: lower fresh eggs gently into 3″ (75mm) boiling water with a large spoon. Replace the lid and boil gently for 3-4″ mins for soft-, 4-5 mins for medium- and 10 mins for hard-boiled eggs.

Place the eggs in eggcups: tap the shell to crack it, pemitting the steam to escape and so preventing further cooking. For sandwiches, salads etc: boil egg for 12 mins and plunge into cold water. This enables the shell to be easily removed and discourages a black ring around the yolk.

If you want to read more about Welsh food, food in general or cooking eggs in particular, just go over to Traditional Welsh Recipes

Keeping Cats Out Of The Garden

Friday, July 1st, 2011

It is very difficult to keep cats out of your garden, but do not give up, it can be managed. Cat owners may not understand why gardeners want to prevent cats gaining access to their gardens, but there are justifiable reasons, it is not always that gardeners hate cats. Cats are ferocious hunters and can also be very destructive.

For example, my next door neighbour had a cat, but felt lonely when her daughter moved away, so she permitted the cat to to have young. Now she has six cats. But cats are not like dogs. My dog stays in my garden not upsetting anyone apart from by barking if a stranger walks past the gate However, that is his job and he is not only telling me but the neighbours as well. These six cats do not stay in their own garden though, so we have all acquired six cats whether we want them or not.

The first issue I noticed was that birds stopped coming to pick my dog’s bowl clean in the afternoon. Then I saw a cat killing a lizard, a beautiful nine inch adult and then I remembered not seeing many lizards recently. There is one lizard, the Tokay, that they have totally wiped out – I used to listen to them calling at night, but no longer.

Cats also dig up flowers when they defecate and use furniture as scratching boards, so I do not want these destructive animals in my garden. But how do you keep cats out of your garden?

Walls are rarely protection against cats, but cats will often prowl along the bottom of walls and if they come across a gap, they will possibly go in out of inquisitiveness, so repair all low-level gaps in your fences. There is not much you can do about the top of your wall other than putting broken glass or electrified wiring up there, but that is not a good idea.

Some dogs are good at keeping cats away, but not all. My dog got a vicious and completely unexpected swipe of claws across his nose one day. He used to run after them when they were kittens, but now they have grown up, he only growls to tell me a cat is on the property. I cannot blame him.

In Australia, many gardeners reckon that transparent bottles full of water confuse cats, so they stay away, but in my experience, only Australian cats react in that way.

A row of prickly bushes or flowers along the base of a wall where cats regularly come in helps. At the bottom of high walls too, where the cat cannot see them until he is on top of the wall. I often see cats mewing (in frustration, I hope) on the top of one of my walls. The only way down is to go back.

If you still cannot keep cats out, then you will need to train them not to come in. This is easiest accomplished by using a few methods. If cats are using your flower pots are conveniences, try smearing the pots with pepper, lavender, lemon, mustard, or tobacco. Or you could leave a mothball in each pot. Some of these will have the desired result for you, others will not.

Then there are industrial repellents, but I do not want to resort to them. However, if you have a big garden and a big problem, it might be the only way. There are also high frequency sound emitters. Humans cannot hear them, but almost all animals can, so I think that that is deplorable as well.

At night, motion-activated external lighting is a great shock to cats. Cats have very sensitive night vision so a sudden flash from a floodlamp really puts them off a garden.

The best disincentive is water. You can get motion-activated sprinklers, which are brilliant at keeping cats out of your garden, but I like to sit in my office or in the garden with a powerful water pistol and squirt them by hand. The lizards have not come back yet, but nor do the cats quite so frequently either.

Owen Jones, the author of this article writes on quite a few subjects, but is at present involved with visual comfort lighting. If you would like to know more or check out some great offers, please go to our website at Outdoor Wall Lamps.

Bamboo Flooring Vs. Traditional FLooring

Thursday, June 30th, 2011

If you are looking for an attractive yet effective alternative to your regular run-of-the-mill flooring, you will want to look into bamboo flooring. Bamboo flooring looks similar to traditional wood floors, and it comes in both vertical and flat grain patterns. If you are looking for a diverse range of colors, bamboo flooring may not be for you. It usually comes in a light honey colored variety, but if you want a darker offering you may be able to get your hands on the carbonized color.

Bamboo can be installed in one of two ways. It can be nailed down like a traditional wood floor. But at the same time it can also be floated, and put into place to make a perfect fit.

Many people worry that bamboo is not as strong as traditional options that are available, but this is definitely not the truth. Bamboo flooring offers about the same level of strengths and stability of regular hardwood floors.

One of the best advantages of bamboo is that it is dent resistant. So if you are looking to lay a floor where there is a lot of traffic, you will want to look into bamboo flooring. It can withstand a high level of traffic without ever compromising its overall strength.

If you live in the United States, you will have to get your bamboo flooring from a retailer that imports it from the Pacific Rim. There are many flooring retailers that carry bamboo and would be happy to supply you with what you are looking for.

Overall, bamboo flooring is a great alternative to other more traditional options. The only drawback is that you may have a hard time finding this material. But if you devote time to your search, you will eventually find the perfect match for your home.

Want to find out more about wood floorings, then visit Moises Perez’s site on engineered wood flooring and bruce hardwood floors.

Eliminating Garden Pests

Monday, June 27th, 2011

Gardening would be a lot simpler without interference from garden pests. The majority of garden pests are small, but they sure are a big hassle. The the majority of widespread garden pests are insects, of course and it is a curious thing that these insects are apt to prosper in conditions that are not quite correct for flowers. Most garden pests do not actually live on the plants themselves, they live in rotting rubbish nearby or in sodden soil and go to the plant to feed. Some insects live in the roots if the soil is too wet.

So, one of the first things to do is to try to lessen the number of destructive insects in your garden. You can go a long way down this route by clearing away any old decaying rubbish and decayed wood. Make certain that your soil is well drained and keep cats out of your garden by squirting them with a water pistol until they get the idea. Cats discourage birds and many birds eat insects.

You should also support insects and other animals that feed on garden pests. Ants can be a nuisance, but they do feed on a lot of insects. Ladybirds do too and so do spiders. Larger animals such as frogs, toads and lizards eat loads of insects, so a small open-ended garden pond could be created to breed frogs and toads. Lizards will come on their own, if the conditions are right.

It is worth taking active steps to encourage the right sort of garden animals. Never use powerful insecticides on your garden as you will destroy all the insects that are on your side as well and the spray may poison the earthworms that are helping to aerate and dry out your soil.

A small pond will encourage birds, frogs and toads, but frogs and toads also like a nice rock to shelter under during the day. Place a couple of rocks the size of a loaf of bread around your garden in the shadow of trees or bushes. Set up a bird table. Birds that feed on bread and nuts do not usually eat insects, but some do. However, the sight of other birds in your garden may encourage insectivores to come in and have a look.

There are fundamentally two types of garden pests: the ones that actually feed on the plant and the ones that suck the sap out of it. Caterpillars can be picked off and destroyed of or you can spray the leaves that are being eaten with a poison for the caterpillars to feed on. Many of the sap-suckers can be seen easily, others cannot. A solution of washing-up liquid and water such as you use to wash dishes will kill the majority of of these including greenfly (aphids).

Slugs and snails do a lot of harm, but some birds including chickens and thrushes find them a delicacy. Chickens can be helpful allies in a garden, but they can be destructive too with all their scratching. Otherwise, you can reduce the population of slugs and snails by killing their eggs.

They are apt to lay their eggs in decomposing leaves or rotting compost, but not in compost heaps which are normally too hot for them, so a good clean up will eradicate a lot of the next generation.

You can kill the adults by placing a few low containers of beer by your plants. The slugs will drink the beer and drown. It is extremely efficient. Slug pellets should kill the t-totallers off. Taking these actions will greatly reduce the number of garden pests attacking your plants.

Owen Jones, the author of this article writes on a number of subjects, but is now involved with exterior wall lighting. If you would like to know more or check out some great offers, please go to our website at Outdoor Wall Lamps.